HAT160 ATS CONTROLLER USER MANUAL
HAT160 ATS Controller 2020-03-14 Version 1.1 Page 4 of 21
1. OVERVIEW
HAT160 ATS Controller
is suitable for CB ATS of single motor with different capacities. It can
accurately detect 2-way voltages of 3-phase 4-wire/single-phase 2-wire and make accurate judgment for
occurred voltage abnormal (such as, over voltage, under voltage, over frequency, under frequency and
loss of phase), then control ATS transfer after delay. When ATS switch gets abnormal, controller can
detect close/open failure and indicates alarm on the front panel to ensure the correct action of ATS. If
I# power gets abnormal, controller can send signal to start genset. Controller can realize remote
communication, remote control and parameter configuration functions via LINK port communication.
