Smartgen HAT160, Руководство пользователя

Страница: 17 / 21

HAT160 ATS CONTROLLER USER MANUAL
HAT160 ATS Controller 2020-03-14 Version 1.1 Page 17 of 21
8. PARAMETERS SETTING
8.1 PARAMETERS SETTING MODE
In manual mode, pressing for 5s and enter into parameters setting mode and manual indicator
flashes;
①
,
②
,
③
,
④
indicators illuminate as Fig. 5.
Fig. 8 Parameter Configuration LED Display
8.2 PARAMETERS SETTING
When it enters into parameter setting mode, press and enter into parameter modifying mode. At
this time
①
,
②
,
③
,
④
indicators indicates setting item numbers;
⑤
,
⑥
,
⑦
indicators mean the item
parameter values.
Specific settings are as below:
1) Select setting number which needs to adjust by pressing and ;
2) Enter into setting status by pressing and illuminated indicators of
⑤
,
⑥
,
⑦
flashes;
3) After setting this parameter by pressing and , save the values by pressing .
NOTE 1 : Please refer to Chapter 7 for parameter list, Table 7 Parameter Setting Contents and Range (2), the No. in
the table is the setting item number;
NOTE 2 : In setting process, discontinue present setting by pressing at any time, exit with the present value not
saved.
NOTE 3 : Please refer to Table 9 Parameter Value Comparison for LED indicator corresponded values.
8.3 RESET TO DEFAULT
In parameter setting mode, press , and
① ③ ④
indicators illuminate and
⑦
indicator flashes;
press ,
⑦
indicator illuminates, which means it can reset to default; exit this mode by pressing
at any time in this process.