Smarter MIG-130, Инструкция по эксплуатации

Страница: 7 / 14

Trueshopping
Operation
Do not operate the machine when the shell has been opened, improper cooling can damage the
parts, make sure the sideboard have been closed. When welding, you must wear helmet, gloves
and other guards.
3.1 Layout drawing of control panel (diagram 3-1)
Diagram 3-1
3.1.1 ON/OFF switch
The switch on the “OFF” position means power has been closed, when the switch is in ”ON” position it
means the supply power for the main transformer and control circuit are connected.
3.1.2 Overload light
If welding with large current for a long time and exceed the duty cycle, the overload lamp will light (yellow),
the machine will stop working until cooling to the stated temperature. When the overload lamp lights you
must turn the switch to “OFF” position and wait about 15 minutes, then you can continue.
www.trueshopping.co.uk 7
Power line
Grounding cable
Torch cable
Current
gear