Smarter MIG-130, Инструкция по эксплуатации

Страница: 2 / 14

Trueshopping
Safety Warning
This sign is used in the manual to indicate caution/danger/warning.
Warning: Please read the follow safety warnings before operation.
Protective clothing - Please wear the appropriate protective clothing when welding:
1. The welding helmet, face shield and protective goggles must be worn when in the working
area at any time.
2. The appropriate face shied with filter and skin face shall be used to protect eyes, face, neck, and ears
from electrical spark and arc ray. The user should not directly watch the arc and must also keep rain
sack away from the arc ray and splash.
3. The appropriate protective clothing, shoes and helmet shall be worn to protect from arc ray, spraying
and splattering.
4. All the buttons shall be done up to avoid the sparking and splattering from coming into contact with the
body.
5. A nonflammable partition and door curtain shall be used to protect other workers from the electric ray
and sparking.
6. Protective goggles must be worn when cleaning welding spatter.
Fire and explosion -The heat of frame and arc can cause fire.
1. Keep the flammable materials including wood, cloth, liquid fuel and gas fuel etc away from
the welding working area.
2. All the walls and floor in the working area should be untracked to avoid smoldering and fire.
3. Ensure that all the working pieces are cleared before doing welding, and do not do weld on the sealed
container to avoid burst.
4. Fire-fighting equipment should be positioned near the welding working area.
5. Do not use the equipments overloading.
6. The fire monitor should be used after welding.
Electric shock - Please do not use the welding source in the wet or wet areas to
avoid any injury or death.
1. Ensure the source underpan and earthing system of input source is connected.
2. Ensure the working pieces and good electric is connected.
3. Ensure the working cable and working piece is connected.
4. Always change the damaged or abrasion cable in time.
5. Keep dry, including cloth, working area, wire, welding torch, soldering turret and power supply.
6. Keep the body insulated from the work piece and ground.
7. The operator should stand on a dry wooden board or insulating platform of rubble shoes when working
in a sealed on moist area.
8. Dry and sealed gloves should be worn before turning on the power.
www.trueshopping.co.uk 2