SPECIFICATIONS
MODEL LX-6010
FASTENER LENGTH
Nails up to 16d
FASTENER HEAD DIA.
5/16” (8 mm)
NAIL TYPE
Hand Driven
MAX AIR PRESSURE
120 psi (8.3 bars)
MIN AIR PRESSURE
70 psi (4.8 bars)
TOOL WEIGHT
1 lbs. (.45 kg)
TOOL LENGTH
4” (101.6 mm)
TOOL HEIGH
T 2.75” (69.9 mm)
TOOL WIDTH
2.19” (55.6 mm)
TRIGGER TYPE
AUTO
AIR CONNECTION
QUICK CONNECT
LUBRICATION
10W Air Tool Oil (Provided)
SAFETY INSTRUCTIONS
Read and understand all safety precautions in this manual before operating.
Failure to comply with instructions in this manual could result in personal injury,
property damage, and/ or voiding of your warranty.
WEAR SAFETY GLASSES
Always wear safety glasses with side shields that meet ANSI Z87.1 requirements
when operating the tool. Make sure all others in work area wear safety glasses.
WEAR HEARING PROTECTION
Wear hearing protection to protect your hearing from noise.
Prolonged exposure to loud noise can result in hearing loss.
NEVER OPERATE THE TOOL WITH OXYGEN OR OTHER
BOTTLED GASES
Oxygen and other reactive or high-pressure bottled gases can cause the tool to
explode. Use clean, dry regulated compressed air from a properly operating air
compressor.
DO NOT EXCEED MAXIMUM RECOMMENDED OPERATING AIR
PRESSURE OF 120 PSI /8.3 Bar.
Exceeding the maximum recommended air pressure can cause the tool housing
to burst, or cause premature failure of components.
NEVER CONNECT THE TOOL TO AN AIR SUPPLY THAT HAS
THE POTENTIAL TO EXCEED 180 PSI/12.4 Bar.
Using a regulated air supply with a line or tank pressure greater than 180 psi can
cause the tool to burst if the air line regulator fails suddenly.
USE AN AIR HOSE RATED FOR 180 PSI/12.4 Bar OR GREATER
Always use air hose rated to handle 180 psi or the maximum
potential pressure of the air supply.
