Longo programmable controller LPC-2.WT1
enabled using
oLight2_rem
(Local/Remote) command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light 1_On (Off/On)
[oLight1_On]
:
Remote on/off command for light1. This command is
enabled using
oLight1_rem
(Local/Remote) command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light4 (Local/Remote)
[oLight4_rem]
:
Enables
oLight4_On
remote command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light3 (Local/Remote)
[oLight3_rem]
:
Enables
oLight3_On
remote command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light2 (Local/Remote)
[oLight2_rem]
:
Enables
oLight2_On
remote command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light1 (Local/Remote)
[oLight1_rem]
:
Enables
oLight1_On
remote command.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Clock Display Enable
[oClkEn]
:
Enabling or disabling clock element on the display.
Type: BOOL
Raw to engineering data:
“0” Disable clock display
→
“1” Enable clock display
→
Clock Set Value
[oRTCSet]
:
Real time clock (HH:MM) value by main module for display on
WP panel. Real time clock is reported using BCD code which must be converted to decimal.
For example, 09:00 is 0000100100000000 (BCD) which is 2304 decimal. Displaying is enabled
with
oRTCEn
command bit.
Type: WORD
Feedback:
Light 4_On (Off/On)
[iLight4_On]
:
When status is active, command for light 4 is requested
and symbol “ON” is present on LCD screen.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light 3_On (Off/On)
[iLight3_On]
:
When status is active, command for light 3 is requested
and symbol “ON” is present on LCD screen.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light 2_On (Off/On)
[iLight2_On]
:
When status is active, command for light 2 is requested
and symbol “ON” is present on LCD screen.
Type: BOOL
5