Longo programmable controller LPC-2.WT1
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light 1_On (Off/On)
[iLight1_On]
:
When status is active, command for light 1 is requested
and symbol “ON” is present on LCD screen.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light4 (Local/Remote)
[iLight4_rem]
:
Active status reports that light 4 is controlled by
the
oLight4_On command
from the main module.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light3 (Local/Remote)
[iLight3_rem]
:
Active status reports that light 3 is controlled by
the
oLight3_On command
from the main module.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light2 (Local/Remote)
[iLight2_rem]
:
Active status reports that light 2 is controlled by
the
oLight2_On command
from the main module.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Light1 (Local/Remote)
[iLight1_rem]
:
Active status reports that light 1 is controlled by
the
oLight1_On command
from the main module.
Type: BOOL
Raw to engineering data:
“0” Light “OFF”
→
“1” Light “ON”
→
Low Battery status
[iLowBat]
:
Indicated battery status.
Type: BOOL
Raw to engineering data:
“1” Low battery power
→
“0” Battery OK
→
Communication status
[iComm]
:
Indicated communication status.
Type: BOOL
Raw to engineering data:
“0” Communication fault
→
“1” Communication OK
→
Actual temp.
[iActTemp]
:
Actual room temperature measured by wireless panel.
Type: WORD
Raw to engineering data:
0 .. 10000 0.00 °C .. 100.00 °C
→
Act. Room RH
[iRHAct]
:
Room humidity measured by wireless panel.
Type: WORD
Raw to engineering data:
0 .. 100 0 .. 100 %
→
Actual light
[iActLight]
:
Actual light intensity measured by sensor.
Type: WORD
Raw to engineering data:
0 .. 10000 dark .. bright
→
6