Longo programmable controller LPC-2.WT1
2 DESCRIPTION
LPC-2.WT1 wireless light switch control panel is used to switch on/off four individual or group of
lights. Panel is equipped with four push buttons (PB), temperature, humidity and light intensity
sensor. Data are displayed on low power monochromatic LCD.
After PB1 pressing, light symbol next to PB1 on LCD will represent on status. This will be seen as a
feedback to the main module. When PB1 is pressed next time, light symbol next to PB1 on LCD will
change and show off status. Main module will receive light off feedback. From main module side,
remote on and off switching of four individual or group of lights is also supported.
LPC-2.WT1 control panel offers few user customization options that can be defined before
installation in the service mode. Users can enable or disable displaying of some LCD elements like
battery sign and real time clock (HH:MM). Disabling LCD element in service mode will override the
enabling LCD element command from the main module. Service mode must only be entered by a
qualified technician.
All parameters on panel are accessible via wireless WM-Bus protocol. Communication between
wireless panel and main module in done using wireless adapter (LPC-2.WA1) which is used as an
access point for up to 4 different Smarteh wireless panels. Settings made on main module are
updated and visible on wireless panels (e.g., LPC-2.WP1, LPC-2.WP2 and LPC-2.WT1) after regular
data update period (approximately 15 minutes) or immediately after some of feedback parameters
has changed (e.g., PB is pressed).
LPC-2.WT1 is powered from the two AA (LR6) battery.
2