Longo programmable controller LPC-2.P02
LPC-2.P02 is connected to the main module RS-485 port using interconnection cable (e.g. SIC4-7)
which must be ordered together with LPC-2.P02 special module. When more modules (e.g. LPC-
2.ID1, LPC-2.ID2, LPC-2.P01 or up to four LPC-2.P02) are connected to main module, splitter (e.g.
SPL-2) is also required (refer to the Figure 2).
LPC-2.P02 module RS485 address (0..3) is selected through two switches on the back side of the
module (refer to the Table 4).
NOTE: For proper system configuration and data allocation please refer to LPC Composer software
help menu.
2
