Longo programmable controller LPC-2.DT1B
1 DESCRIPTION
LPC-2.DT1B control panel (CP) is used to switch on and off four individual or group of lights.
Panel is equipped with four push buttons (PB), temperature sensor and light intensity sensor.
To switch on or off
individual or group of lights , corresponding PB should be pressed respectively.
For example if first light is switched off, light symbol next to PB1 on LCD will represent off status.
After PB1 pressing, light symbol next to PB1 on LCD will represent on status and on command will be
sent to MCU. When PB1 is pressed next time, light symbol next to PB1 on LCD will change and show
off status. Light off command will be sent to MCU. From MCU side, remote on and off switching off
four individual or group of lights is also supported.
Color back ground LCD picture is possible to change by using Smarteh LCD Composer software.
Light intensity sensor controls LCD intensity.
It is possible to display real time clock (HH:MM). Enabling can be done by MCU enable commands.
All parameters are accessible on panel's communication port. When panel is connected to the LPC-2
main control unit (MCU) parameters can be viewed and modified with LPC Manager application.
LPC-2.DT1B parameters allows adaptation to desired panel functionality.
1
