Smartec STC-3902, Руководство пользователя

Страница: 39 / 42

DIP SWITCH SETTING
B. 485 TERMINATION
The 1
st
of DIP SW2 is used for 100W termination.
Set ON DIP SW2 -1
st
of only the last looped camera from the controller.
Even in case of only one camera, set ON DIP SW2 -1
st
of the camera.
C. PROTOCOL
The 3
rd
, 4
th
of DIP SW2 above are used for Protocol Setting.
Factory default: Pelco-D or Pelco-P (Auto detection)
DIP SW 2-3
rd
4
th
OFF/OFF Pelco-D or Pelco-P
ON/ON Not used
ON/OFF Maxpro
D. BAUD RATE SETTING
The 7
th
, 8
th
SW of DIP SW2 above are used for BAUD RATE setting.
DIP SW can be changeable to 4800bps, 9600bps.
Factory default : 2400bps.
*
PELCO D 2400bps
* PELCO P 4800bps
* MAXPRO 9600bps
DIP SW 2-7
th
DIP SW 2-8
th
BAUD RATE
OFF OFF Not Used
OFF ON 2400bps
ON OFF 4800bps
ON ON 9600bps
* The 2
nd
, 4
th
, 5
th
, 6
th
of DIP SW2 are not used.
TERMINATION
SW1-ON
CAM 1 CAM 2 CAM n-1 CAM n