INSTALLATION
F. WALL MOUNT TYPE
F-1.
If you want to install the speed dome on the concrete wall, you need to make
12.5mm diameter 4 holes by drill like FIG. 30. (Depth 37mm)
F-2.
Install SET ANCHOR BOLT on the holes.
F-3.
Fix SET ANCHOR BOLT of the bracket by nut.
To install Wall Mount Bracket.
Tip> Select a ceiling board strong enough to hold 4 times the total weight if camera.
(Weight combined camera: approx. 5kg)
F-4.
Screw up the Bracket tightly using the wrench(M4.0) after putting the rising into
the hole. (FIG. 31)
F-5.
Camera installation is the same as that of Pipe mount bracket installation.
(Refer to page 11)
1. WALL MOUNT BRACKET 1ea 2. SET ANCHOR BOLT (W5/16) 4ea
CONTENTS
FIG. 30
4-Ø12.5mm Hole
<The cable out of ceiling>
FIG. 31
