QUICK OPERATING KEYS
The dome supports Pelco-D/P, SAMSUNG and VICON protocols.
The dome may be used with any controller or DVR etc that supports the Pelco D and Pelco
P protocols.
The default setting of the dome is Pelco D / P (auto detection) with 2400 bps (baud rate).
[PELCO D/P PROTOCOLS]
The comprehensive feature set of the dome is available from Pelco compatible controllers
via quick operation keys as defined below.
1-64 + preset and 100~200 + preset are used for normal user presets.
Presets 65-99 + are reserved for special functions.
For example, to enter OSD MENU, press the button 95 + PRESET
<Quick Operation Key Table 1>
Number
Note
Function
1~64,100~200
+Preset Preset
Executing Preset 1 ~ 64, 100~200
65 +Preset
Preset Status
Display Preset Status
66 +Preset
Auto Scan
Executing Auto Scan
67 +Preset
Auto Flip
Selectable On/Off in Auto Flip mode
68 + Preset
Camera Reset
Re-setting Zoom camera module
70 + Preset
VIB CORR
Selectable On/Off in Picture Stabilization function
71~78 + Preset
Group Tour
Executing Group Tour #1 ~ #8
81~88 + Preset
Pattern
Executing Pattern #1 ~ #8
91 + Preset
Zero Position
Searching Pan / Tilt Zero Position
92 + Preset
Freeze
Select Freeze image when camera is working
93 + Preset
BLC
Selectable On/Off in BLC function
94 + Preset
Day / Night
Selectable Day / Night / Auto Mode
95 + Preset
OSD
Entering OSD Main Menu
96 + Preset
Focus Adjust
Focus adjust
97 +Preset
Alarm
Selectable Enable/Disable all Alarms
98 +Preset
AUX 1
Selectable On/Off in Aux1
99 +Preset
AUX 2
Selectable On/Off in Aux2
<Quick Operation Keys Table 2: Use these function keys if controller has these keys>
Menu
Function
Tilt Up / Down
Sub menu cursor moves up / down
Pan Left / Right
Enter to the sub menu or status change or decrement
Focus Near
Using for Enter key when user select YES or NO
Focus Far
Using for function changing keys when set coordinate
Zoom Tele
Status cursor to the right
Zoom Wide
Status cursor to the left
● 65 + preset : "Preset Status" is displayed, to remove this screen, press Focus Near button.
● 70 + preset : This feature provides picture stabilization image and it is by EX980S (P)
module
only.
This feature is operating by preset number but not included in OSD main menu.
This is optional function due to zoom module
