48
SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1
Single Circuit Definition
defines parameter for single circuit:
•
Circuit Description –
defines the name of circuit.
•
User Data –
circuit user data.
•
LED Serial Count –
number of LEDs connected in series.
•
LED Parallel Count –
number of LEDs connected in parallel.
•
Joined Channels Count –
number of connected channels in custom illumination.
Single LED Data Definition
section defines parameters for the single LED:
•
LED Type ID –
user configurable, with a value between 0 – 65535
•
LED Wavelength –
wavelength of the LED determines the color of the LED, with a value
between 0 – 255[x10nm]
•
Forward Voltage (Uf) –
maximum forwarded voltage on a LED, with a value between 0.00
–
600.00[V]. This value should be read out from the specifications of the LED
•
Dynamic Resistance (Rf) –
LEDs electrical resistance when it is in operation, with a value
between 0.00 – 600.00[Ohm]. This value should be read out from the specifications of the
LED
•
Max DC Current (Built in light head) –
maximal allowable current trough LED when built in
light head with a value between 1 – 65535[mA]
•
Max Pulsed Current –
maximal allowable current trough LED when the device is in pulse
mode, with a value between 1 – 65535 [mA]
•
Max DC Power (LED only) –
maximal DC power which can run through single LED, with a
value between 0 – 65535[mW]. This value should be read out from the specifications of the
LED
1
4
3
2
