Electric charging station WBSH2-7
User Manual and data sheet
20
quickly.
•
Check the input voltage.
Flashes once slowly
and then four times
quickly.
Overvoltage
14
•
Check that the incoming cables are connected
correctly.
•
Check the input voltage.
Flashes once slowly
and then five times
quickly.
Over-temperature
protection
15
Check that the charging station is not installed in high
temperature environments.
Flashes once slowly
and then six times
quickly.
Measurement
failure
16
Switch off and restart the charging station.
Flashes once slowly
and then seven times
quickly.
Anti-discharges
17
Check that the charging socket and its cable are not damaged
or wet.
NOTE!
If they are damaged, it is advisable to disconnect the
charging station and contact our customer support
immediately
through
the
following
link:
http://helpdesk.smartdhome.com/users/register.aspx
Flashes once slowly
and then eight times
quickly.
Short circuit in OUT
18
Check that the charging socket and its cable are not damaged
or wet.
NOTE!
If they are damaged, it is advisable to disconnect the
charging station and contact our customer support
immediately
through
the
following
link:
http://helpdesk.smartdhome.com/users/register.aspx
Flashes once slowly
and then nine times
quickly
Overcurrent OUT
19
•
Check that the charging socket is connected
correctly.
•
Verify that the on-board charger (OBC) is functional.
NOTE!
If the fault persists, contact our customer support
through the following link:
http://helpdesk.smartdhome.com/users/register.aspx
Flashes twice slowly
and once quickly.
Electric car
response time-out
21
•
The electric car battery is fully charged.
•
The charging socket is not properly connected to the
car socket, therefore it is advisable to disconnect and
reconnect it.
NOTE!
If the fault persists, contact our customer support
through
the
following
link:
http://helpdesk.smartdhome.com/users/register.aspx
Flashes twice slowly
and
then
twice
quickly.
Electric car not
supported
22
The electric vehicle connected to the charging station does not
comply with international standards (IEC) and therefore
cannot be powered.
Flashes twice slowly
and then three times
Attack/release
Internal relay
23
The charging station is damaged and requires the assistance
of one of our specialized technicians, therefore we