Electric charging station WBSH2-7
User Manual and data sheet
11
•
Insert the three cable terminals on the wires of the power cable, crimping them using suitable pliers.
NOTE:
Here are some suggestions for selecting the size of the cables to be installed. The table below shows all the
types of recharging station provided by SMARTDHOME therefore it is recommended to use:
Product
Maximum current
Input terminals
Minimum section
1
01040-1500-00
32 A
L1 – L2 – L3 - N - PE
3 x 6 mm
2
•
Open the rear cover and pass all cables through the grommet and make all connections to the terminal block.
