SMARTdesks Newpath DNP-602428-L18, Руководство по сборке

Страница: 5 / 23

Technical Support: 800-770- 7042 | www.smartdesks.com Universal SMARTdesk Assembly 5
Attach base cabinet assemblies and panels
to the top with Lamello Cabineo Surface
Connectors
• The screws of the surface connectors are
outset to facilitate locating them in the
pilot holes.
• Note the locations of the wire pass-
throughs and 80mm wire grommet: they
should be at the back side of the top,
opposite of the user side.
• Place dowels to help locate the modesty
panel (the next step).
• Start with the end panel with the CPU
cabinet assembly.
• If you are assembling a double, set the
middle CPU cabinet assembly.
• If you are assembling a single or a double,
set the end panel next.
• Use the ball end 4mm hex driver in a screw
gun to drive the surface connectors into
the top.
• The point of using a ball end hex driver is
to let you drive a square fitting at an angle.
Use this design feature to your advantage.
Note that the keyboards trays
have been mounted prior to
mounting the base panels.
If you skipped this step,
please help yourself out and
install them sooner, rather
than later.
If you are assembling a desk
for laptops, keyboard trays
will not be included.