Page 72 of 80
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airHaul™ Nexus User Guide
•
Transmit power and RSSI are important criteria for getting a stable link
Throughput Optimizer
•
The default value for the Throughput Optimizer is 6
•
Throughput Optimizer settings is used to optimize the wireless link throughput
•
Smaller
"
Throughput Optimizer
" value means more stable link
Performance
The primary reason for implementing RTS/CTS is to minimize collisions and retransmission in a highly
overcrowded
.
Fragmentation
•
Fragmentation can be used to avoid retransmission of the packets.
•
The fragment size value can typically be set between 256 and 2,048 bytes.
•
Fragmentation can improve throughput if the fragmentation threshold is set just right
value.
Range
•
Maximum range of sB3010 is 20 Miles
•
6 Miles can easily achieved with 23 dBi antenna
•
More than 6 miles can be achieved by using high gain antennas.
RSSI
•
Recommended RSSI value of -75 dB or better for optimal performance
.
Profile manager
•
With Profile manager one can save/load multiple Operating profiles on the device.
•
The Profile Calendar will automatically activate them at defined times.
•
Optimal bandwidth utilization of the bandwidth on the basis of various time intervals as
per the traffic pattern of the customer can be achieved through pre-scheduling of profiles
Bandwidth Controller
•
Bandwidth Controller will define the Maximum upload Wireless Throughput (Kbps) for a
radio.
•
Maximum bandwidth capping for sB3010 is 15 Mbps
Link Test
•
Web based ping test and throughput test option is available for testing a link
.
Association of Radio
•
In the 5 GHz band, due to DFS requirements (avoidance of interfering with Military
Radar), there might be a time delay in association of a radio. Usually it will associate
within 1 minute.
•
For few channels the radios is required to sense the channel for a full one minute before it
will even send out a beacon for setting up a link
