Setting
Use
Notes
Projector Functions menu
Auto Signal Detect Enables or disables signal searching of
input connectors.
The default is off.
Select
On
to have the projector
continuously switch inputs until it finds
an active video source.
Select
Off
to maintain signal detection
in one input.
Lamp Reminder
Turns the lamp replacement reminder
on or off.
This reminder appears 100 hours
before the recommended lamp
replacement.
Lamp Mode
Adjusts lamp brightness to
Standard
or
Economy
.
Standard
displays a high-quality,
bright image.
Economy
increases the lamp life by
decreasing the brightness of the image.
Auto Power Off
(minutes)
Sets the length of the auto power-off
countdown timer between 1 and 240
minutes.
The default is 120 minutes.
The timer begins to count down when
the projector no longer receives a video
signal. The timer finishes when the
projector enters Standby mode.
Select
0
to turn off the timer.
Zoom
Adjusts the zoom to the center of the
image in or out from 0 to 30.
The default is 0.
Zooming in cuts off the outer edges of
the source video.
Projector ID
Sets the projector’s unique ID number
(from 0 to 99) within your organization’s
network.
You can refer to this number when
using the network remote management
feature (see
system through a network interface
page 59).
C H A P T E R 3
Using your interactive whiteboard system
16
