Extended Settings and Functions
27
Press the keys
PR-
,
PR+
,
V-
or
V+
to move the cutout.
Repeated pressing of the green
ZOOM
key enlarges the image more and more (up to 16-fold
magnification).
To leave the
ZOOM
menu, press
EXIT
.
6.14 Satellite Overview
Press the
SAT
key to get a list of all programmed satellites.
6.15 Switching TV/AV
Press the
TV/AV
key to switch between satellite signal via the receiver and direct antenna signal
via the TV set (switching on/off the 12 V switching voltage at the SCART output).
6.16 Pause Function
To freeze the image of the program currently shown, press the
PAUSE
key.
To cancel the Pause function, press the
PAUSE
key again.
6.17 Software Version
The menu item
Information
in the menu
Tools
displays the version of the loaded software.
No settings are possible here.
6.18 Factory Settings
If you erroneously saved wrong settings or if you want to pass on the receiver without your settings,
then you can reset the receiver to the factory settings (reset):
To reset the receiver:
1. In the menu
Tools
, select the sub-menu
Factory Settings
.
2. Press the
OK
key. You will be asked if you want to reset the receiver and delete individual set-
tings.
3. Select
Yes
or
No
and then press
OK
. After resetting your receiver, the language selection menu
will be displayed.
6.19 Configuring the RAPS System
6.19.1 Show the Date of the RAPS File on the Receiver
The window RAPS System displays on top at
Last changes from
the date of the RAPS file on the
receiver. No settings are possible here.
6.19.2 Setting RAPS Mode
Select
RAPS Mode
to configure RAPS:
Update
The receiver channel list will only be updated.
Config
The receiver will be set to factory defaults. The channel list will be created com-
pletely new (similar to the first installation).
Setup
Here you can set the RAPS transponder manually.
Attention!
Change the RAPS transponder only after regarding advice. If you change it apart
from that, RAPS cannot work correctly anymore.
