SMART Board MX Pro Series, Руководство по установке и обслуживанию

Страница: 90 / 115

Appendix B
Adjusting display settings
smarttech.com/kb/171555 91
Advanced
Option Values Function Notes
Display
Walllpaper
[N/A] Sets the background image on the
display Only .png, .jpg, .bmp files are
supported
Save the wallpaper file to a USB drive
and insert it into the USB port. See
Connector diagrams on page 46.
Launcher [Apps] Select which apps appear in the
launcher. [N/A]
Home screen [Apps] Select three apps to appear on the
home screen Tap the app you want to remove from
the home screen. Then select the app
you want to appear on the home
screen instead.
HDMI out
480p
1080p
4K
Select the output resolution Ensure the device that is receiving the
display’s HDMI out signal matches the
selected output resolution.
Sleep
15 minutes
30 minutes
45 minutes
60 minutes
Always on
When a time interval is selected, the
display’s screen will turn off even if
the connected computer or device is
still on. If the iQ experience is selected, the
display’s screen will not turn off when
a time interval is selected.
Brightness and volume
Auto
[N/A] Automatically sets the display’s
brightness based on the room’s
brightness. The ambient light sensor can detect
the room brightness and adjust the
display’s screen brightness
Manual
[N/A] Sets the display’s brightness level Disable Auto to set the brightness
manually
Volume
[N/A] Sets the display’s volume level [N/A]
OTA
OTA server [OTA servers] Sets which server the display
connects to for updates
NOTE
The display must be connected to
the Internet to check for system
software updates.
Default is Auto .
Automatically check for
updates Enable
Disable
Enables or disables checking and
downloading updates for the display’s
firmware Enabled by default.
If this is disabled, manually check for
updates in
Update on the next page.