IMPORTANT INFORMATION
iii
smarttech.com/kb/170446
l
This SMART product should be used only with European TN and TT power distribution
systems.
It is not suitable for older, IT-type power distribution systems found in some European
countries. "This system (IT-type) is widely used isolated from earth, in some installations in
France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral
not distributed, at 230V line-to-line." (IEC 60950:1999)
Contact qualified personnel if you’re uncertain of the type of power system available where
you’re installing your SMART product.
l
You must connect the USB cable that came with your SMART Board® interactive flat panel
to a computer that has a USB compliant interface and that bears the USB logo. In addition,
the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark
and CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid
damage to the SMART Board interactive flat panel.
IMPORTANT
l
The following are the power requirements for your interactive flat panel:
Model
Power requirements
8070i-G4-SMP
100–240V, 8.9–4.5A, 50/60Hz, 310W
8084i-G4-SMP
100–240V, 50/60Hz, 530W
l
For additional requirements and other information, refer to your interactive flat panel’s
specifications (see
