26
Installing Service Packs
You can add the quiet switch /qn to the default command line installation above to install the
service pack silently.
1. Click
Start > Run
and type
CMD.
A DOS window opens.
2. Type the following command line:
msiexec /p
"
Path to the .msp
\Board95ServicePackSPx.msp
"
/qn
REINSTALLMODE=omus REINSTALL=ALL
3. Press
Enter
.
The Service Pack Installation Program
You can also download the
Board95ServicePackSPx.exe
(where
x
is the service pack number)
installation program from the SMART website. You can run the program from the website, or you
can download the
Board95ServicePackSPx.exe
file to your computer or to a network drive.
You can use the following command to perform a default service pack installation:
1. Click
Start > Run
and type
CMD
.
A DOS window opens.
2. Type the following command line (including quotation marks):
"
Path to .exe
\Board95ServicePackSPx.exe
"
3. Press
Enter
.
You can add the silent switch /s to the above command to perform a silent service pack
installation:
1. Click
Start > Run
and type
CMD
.
2. A DOS window opens.
3. Type the following command line (including quotation marks):
"
Path to .exe
\Board95ServicePackSPx.exe
"
/s
4. Press
Enter.
NOTES
•
You can copy the
Board95ServicePackSPx.exe
file to any accessible network server and run
the command from that location.
•
Don’t use any other options.
•
You can’t use a command line to remove a service pack. To remove a service pack, you must
remove SMART Board software, using Windows Control Panel or a command line (see
page 19), and then reinstall the original software.
To perform a silent installation using the installation package
To perform a default installation using the installation program
To perform a silent installation using the installation program
