User Guide
P.11
To enter Cold Weather Mode (1-way remote):
1.
Rapidly press
AUX
twice. The remote’s LED will start flashing.
2.
Press and hold
until the parking lights will flash for 2 seconds, pause, and then
flash
3 times.
To exit Cold Weather Mode, do any one of the following actions:
x
Open the hood.
x
Start the engine remotely.
x
Turn the ignition key to the IGNITION ON (RUN) position.
x
Press and release the
AUX
button.
a.
The
button on the transmitter will light up.
b.
While the
button is still lit, press and hold the
button until the remote
beeps once, pause, then beeps once again.
c.
Release the
button. Its LED will flash quickly.
x
(1-way remote)
Rapidly press
AUX
twice. The re mote’s LED will start flashing. Press
and hold
until the parking lights flash for 2 seconds, pause, and then flash twice
.
To verify whether the system is in Cold Weather Mode:
x
(Automatic transmissions only)
Press the brake pedal: If the vehicle is in Cold Weather
mode, the parking lights will remain
ON
while the brake pedal is pressed.
x
Do the vehicle status request feature
(page-16).
Extended Run Time
While the vehicle is running under a remote start, press and hold the
button until the remote
beeps. This will reset the run time counter to zero and restart the run time cycle from the beginning.
Note:
The extended run time procedure can only be carried out once per remote start.
To stop the vehicle, at any moment, simply press and release the
button.
Example:
If your remote car starter is programmed for a run time of 3 minutes and your vehicle
has been running for 2 minutes already, pressing the
button will reset the counter to zero and
allow the engine to run for another cycle (in this case, 3 minutes).
Disable/Enable LED flashing
To disable the LED: Press
and
simultaneously until the remote beeps once, pauses for
2 seconds, then beeps once again. Release the buttons. The parking lights will flash 3 times.
To Enable the LED: Press
and
simultaneously until the remote beeps once, pauses for
2 seconds, then beeps once more. Release the buttons. The parking lights flash once.
Constant output
Pressing and holding the
button for more than 3 seconds will lock all doors and will send a
constant pulse as long as the
button is held down (maximum of 15 seconds). This constant
pulse can be configured to activate certain functionalities such as rolling up the windows –
Please
refer to your installer to see if your vehicle is compatible with this option.
Pressing and holding the
button for more than 3 seconds will unlock all doors and will send a
constant pulse as long as the
button is held down (maximum of 15 seconds). This constant
pulse can be configured to activate certain functionalities such as rolling down the windows –
Please refer to your installer to see if your vehicle is compatible with this option.
P.10 User
Guide
To take the system out of Valet Mode
Using the KEY (Ignition Valet Mode):
1.
Insert the ignition key into the ignition switch. Within 10 sec., cycle the ignition key to the
IGNITION/RUN
and
OFF
positions 5 times until the parking lights flash
twice
.
2.
Turn the ignition
OFF
.
3.
The LED on the antenna will flash rapidly, indicating that the vehicle is now out of Valet
mode.
Using the TRANSMITTER (Remote Valet Mode):
1.
Press and hold the
and
buttons simultaneously until the remote beeps
once
, pauses,
then beeps
once
again. Release the buttons.
2.
The
and
button will flash
3 times
.
3.
The LED on the antenna will flash rapidly, indicating that the vehicle is now out of Valet
mode.
If someone has attempted to remote-start the vehicle while in Valet Mode; the parking lights will
turn
ON
, then
OFF
, then flash
twice
.
Panic Mode
Note:
Panic mode can only be activated if the horn has been adequately configured by the
installer.
In an emergency situation, you can activate panic mode by pressing and holding the
AUX
button
until the horn starts honking. If the vehicle is under a remote start, the engine will shutdown
automatically before setting off the horn. You can stop the horn by pressing:
(this will lock your doors and deactivate panic mode)
,
or
(this will unlock your doors and deactivate panic mode).
Furthermore, the panic mode can be stopped by activating
Valet Mode (page-9)
* Panic Mode will automatically shut down after 30 sec.
Quick Lockout
TM
(Also called
Secure Panic
.) For fast protection in emergency situations, the system will
LOCK
all
doors when you press the brake pedal while you hear the Horn sounding. (
Quick Lockout
is only
available when Panic mode has been triggered.)
Cold Weather Mode
If the vehicle has a
manual transmission
,
Ready mode
(page-7)
should be set before entering
Cold Weather Mode. When Cold Weather Mode is active, the engine starts every 2 hours and runs
for 3 minutes (or for 8 or 20 minutes with diesel engines)
.
Cold Weather Mode automatically ends
after 24 hours (or 12 starts).
To enter Cold Weather Mode (2-way remote):
1.
Press and release the
AUX
button.
2.
The
button on the transmitter will light up.
3.
While the
button is still lit, press and hold the
button until the remote beeps
once, pause, then beeps twice.
4.
Release the
button. Its LED will flash quickly.
