Publications No.
Issue Date
INSTALLATION
INSTRUCTIONS
Accessory
Application
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
AII 39868 (0808)
1 of 8
08E60-TK6-1000-91
AII 39868
KEYLESS ENTRY
P/N 08E60-TK6-100
2009 FIT
AUG 2008
PARTS LIST
Key
Accessory User’s Information Manual
TOOLS REQUIRED
HDS (Honda Diagnostic System)
Key Cutter (ILCMK1COMP)
INSTALLATION
1.
Using the key cutter, cut this key to match the
original ignition key.
2.
Using the HDS, program this key to the vehicle.
Verify that the key works properly.
3.
Check the operation of the keyless entry using the
accessory user’s information manual supplied.
4.
Give the key to your customer.
Customer Information:
The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
NEW KEY REGISTRATION
1.
Acquire the PCM code from ISIS.
2.
Connect the HDS tester to the OBD II data link
connector, then turn the ignition switch on.
3.
Start the HDS, and click the car icon.
4.
Input the VIN and other requirements in accordance
with the HDS, then click the check button.
Click the car icon.
Input the VIN and
other requirements.
Click.
(BASE MODEL)
