background image

TM

Thank you for your purchase of a SkylinkHome  , Deluxe Remote, 
Model TC-318-7 / TC-318-10 / TC-318-10  / TC-318-14.  This transmitter 
which is also called transmitter in this document

 

allows you to wirelessly 

TM

operate SkylinkHome  receiver modules.  

TM

All wireless signal communications within the SkylinkHome   system are 
based on rolling code technology to ensure highest security is  used. 

The following items are included in this package:

One of TC Series Remotes

Mounting Bracket and Accessories 

Lithium Battery CR-2032 

User's Instructions

1. INTRODUCTION

1. INTRODUCTION (CONT)

1. Slide out the battery door from the unit.

2. Insert the CR-2032 lithium battery to the 
    battery holder. Positive side facing up.

3. Insert the battery door to the transmitter.
    The red LED on the front of the unit will 
    be on for 1 second.

10-Button 
Remote
TC-318-10

14-Button 
Remote
TC-318-14

Slide out 
battery door

LED on for 
1 second

Insert battery 
door with battery

Model TC-318-7
Model TC-318-10
Model TC-318-14

7-Button Remote
10-Button Remote
14-Button Remote

The Deluxe Transmitter can transmit 3 types of command:

1) Individual Operation - Operates one light only, i.e. the ceiling light in 
    the family room

2) Zone Operation - Operates one specific zone or area, which consists 
    of multiple lights, i.e. all lights in the kitchen

3) All On / All Off - Operates all lights in the premises, i.e. all lights in the 

TM

    house connected with SkylinkHome  lighting modules.

Before you can control the lights (or small appliances, etc.) with the trans-
mitter, you may need to program different buttons on the transmitter to 
various receiver modules.  It is a lot easier if you plan in advance of how 
to setup your system. For example, you may list out the lights and their 
locations with zone grouping that you plan to include in your lighting system. 

Installing Battery

 

The transmitter is powered by a lithium battery CR-2032. Follow the 
instructions below to install the battery to the transmitter. 

Number 
Button

Number 
Button

1

2

3

4

5

6

7

8

9

10

Light

Light

Zone

Zone

Family Room Floor Light

Family Room Ceiling Light

Kitchen Floor Light

Kitchen Ceiling Light

Bedroom Floor Light

Bedroom Ceiling Light

Master Bedroom Floor Light

Master Bedroom Ceiling Light

Front Yard Light

Back Yard Light

Zone 1

Zone 1

Zone 2

Zone 2

Zone 3

Zone 3

Zone 4

Zone 4

Zone 5

Zone 5

3

4

Back Yard
Zone 5

Kitchen

Zone 2

1

2

Family Room

Zone 1

7

8

Master Bedroom

Zone 4

5

6

Bedroom

Zone 3

Front Yard
Zone 5

You may use the following table to fill in the lights or small appliances 
you would like to control and their zone numbers, this will give you a 
clear direction during the programming process. 

2. PROGRAMMING TRANSMITTERS TO RECEIVER MODULE 

In order to operate the receiver module remotely with a transmitter, it 
must be programmed to the receiver module. Follow the instructions 
below. 

Mounting
Bracket

+

+

CR2032

Battery door 
with holder

Positive 
side up

Example :

Lithium 
battery

7-Button 
Remote
TC-318-7

Screws and 
anchors

Отзывы: