Smart Start SSI 20/20, Руководство пользователя

Страница: 6 / 34

Rolling Retest Procedure
1. Unit parameters have been set by Service Tas and require random rolling
re-tests. The first test will occur within the first 5 – 15 minutes and then randomly
over every consecutive hour after initial retest.
2. The device will indicate that it is time to submit a rolling retest by the screen
displaying “RETEST” , the LEDs flashing and the device beeper sounding.
3. You have 5 minutes to safely provide a breath sample. The road rules state that
you must find a safe place and pull over.
4. Drink water.
5. Provide a breath sample.
6. Once a pass breath sample has been provided you can continue driving.
Please note, even if you have arrived at your destination and are about to
switch the Vehicle OFF, you must still provide a test. Failure to provide a test
is a violation and will put the device into early recall.
It is important that you provide a PASS breath sample. Eliminate
contaminants by drinking water. If a positive test sample is recorded for a
rolling retest you will be put into an immediate 7 day count down and will be
required to return for an unscheduled service to reset the device.
Important
5