Smart Optics Activity 850, Руководство по эксплуатации

Страница: 65 / 66

64
13. Maintenance and servicing
The axes should be calibrated every four weeks using the calibration model supplied to ensure
consistently good results. They should also be calibrated each time the device is transported. We
also recommend performing an axis calibration at temperature fluctuations of +/- 15 °C.
The scanner should be cleaned regularly when in service. To do this, turn the scanner off and use
a vacuum cleaner to carefully remove any dust and foreign objects that have accumulated in the
base area of the scanner.
The optics of the 3D sensor are situated in the upper area of the interior of the scanner. Do not
attempt to clean them, as inappropriate cleaning may result in damage.
Cleaning with a slightly damp microfibre cloth is sufficient in most cases. Do not use paper
towels, etc., if at all possible, as they can easily scratch the sensitive plastic surfaces.
Please do not treat the case with strong cleaning agents.
14. Faults and repairs
Please remember that the scanner is a sensitive optical device. Maintenance and repair may
therefore be performed only by trained technicians.
Faults that cannot be cleared by restarting the scanner or the program should be referred to
customer service.
15. Environmental factors and disposal
16.1 Packaging
You can return the packaging to your dealer for disposal.
We strongly recommend that you keep the packaging so that it can be used if you need to
transport the scanner or if you have to return the scanner to us in the event of a warranty claim.
16.2 Disposal
You can return the scanner to the manufacturer or dealer for disposal.
Please remember that the scanner is designed exclusively for commercial or industrial use.
It must therefore not be taken to public waste facilities for disposal.
Please contact your dealer or the manufacturer regarding disposal.
You can find out more at
www.smartoptics.de
by going to Company and then Environment.
WEEE registration number: DE47893210