SMART Embedded Computing MC1600, Инструкция по установке и эксплуатации

Страница: 54 / 126

54 MC1600 Extreme Edge Server Installation and Use (6806870A02B)
System Overview
System Overview
1.6.1 CPU SKU Support
Many different CPU SKUs are available, having various core counts, core frequencies,
cache sizes, and performance levels. On the Extreme Edge Server, the following SKU has
been qualified in the initial product release.
1.6.2 Memory Controller
The Broadwell-DE processor offers an Integrated Memory Controller (IMC) that has a
two-channel memory interface operating in the Independent Channel Mode. Each channel
consists of 64 data and 8 ECC bits, plus address, control, and management signals.
On the Extreme Edge Server, a DDR4 memory interface is supported. DDR mode is
determined by the DDR3_4_STRAP pin strapping. Signal DDR3_4_STRAP is pulled high
to select DDR4 mode.
Dual memory channels are supported with one DIMM per channel at up to 2166 MT/s.
Single and dual rank DIMMs are supported. Supported DRAM device densities are 4Gb
and 8Gb. Signaling voltage for the DDR4 interface is 1.2V.
Possible DIMM types are shown in Table 1-3 , they can be ECC or non-ECC modules. The
type qualified for the initial product release is highlighted in green. These are x72 (ECC-
capable) modules.
Table 1-2 CPU SKU Support
CPU Type Cores Frequency Cache
DDR4
Speed
TDP
SMART EC
Part #
Xeon D-1567 12 2.1GHz 18MB DDR4-2133 65W 5106814F44
The extended temperature-capable DIMMs are required for extended temperature
MC1600 Extreme Edge Server SKUs.
Table 1-3 ECC/Non-ECC DIMM Types
DIMM Type Ranks
8Gb
Chips
Qualified Module
SMART EC
Part #
RDIMM 1 Rank x8 8GB
X4B08QD8BNTDME-E-AY1 (C-temp)
X4B08QD8BNTDMW-E-AY1 (I-temp) 9706802B79
9706802B80
RDIMM 1 Rank x4 16GB
RDIMM 2 Rank x8 16GB
RDIMM 2 Rank x4 32GB