SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 12
6
INITIAL SETUP
6.1
INSTALLATION
NOTE: Please be aware of the atmospheric conditions outlined later in this manual and ensure that
location chosen for the installation of your SDS-2500 meets these requirements. Do not install in an
environment with excessive dust levels and ensure area is well ventilated.
Two options for installation are available, the first of which is for the SDS-
2500 to be mounted in a 19” rack
mounting solution. 2x rack mounting ears are provided in the packaging for the SDS-2500 along with 6x
counter-sunk screws.
Using a Philips head screwdriver attach the ears to the pre-drilled locations on the sides of the matrix. Do not
over tighten the screws or they may be damaged.
Once both mounting ears have been fitted to the SDS-
2500 the unit can be attached to your 19” rack mounting
solution. Screws for mounting to your 19” rack are not supplied with the SDS
-2500, these should be sourced
from the manufacturer of the rack solution.
