SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 16
7.2
MODE SELECTION
Three buttons are available on the front of the SDS-2500 to select between the different modes; Matrix,
PIP/POP and video wall.
M1
–
Matrix Mode
M2
–
PIP/POP Mode
M3
–
Video Wall Mode
To Select Matrix Mode press the M1 button. The screen will then update to show as below.
This screen will be displayed for five seconds, within this time you must press the Enter button, located in the
EDID section of the front panel. If pressed within five seconds the SDS-2500 will switch to matrix mode and a
confirmation of the change will appear as below.
If the Enter button is not pressed within five seconds the LCD will return to previous state.
The same process as above can be repeated to select either of the remaining modes by first pressing their
relevant mode button.
