iLid® Table Instructions ©2018 CBT Supply, Inc.
6
Technical Support: 800-770-7042
Install Keyboard tray
Keyboard Tray KB26 has four L brackets that need to be attached
at a uniform depth with the tabs oriented inside. four metal
machine screws are used to fasten the L brackets. This is shown
using the third hole from the bend in the L.
Install the KB26 keyboard tray using eight wood screws,
two per L bracket. Pilot holes are provided that position
the retracted keyboard to be flush with the user edge of the
table. It is easiest to start with the KB26 retracted, installing
the two exposed brackets, then opening the KB26 to permit
access to the front brackets.
KB26 in open position allows access to front L brackets
for installation.
Install Keyboard Stow Tray
The Keyboard stow tray option is installed using the four
wood screws into the pilot holes made for this purpose.
