iLid® Table Instructions ©2018 CBT Supply, Inc.
4
Technical Support: 800-770-7042
Install VESA bracket
Use three Euro Screws to install the VESA
mount to the iLid. The arangement of pilot
holes give options for placement in 1/2”
increments. The location can be fine tuned
when installing the actual monitor.
If desired, a “dry fit” for installing the monitor
may be performed, so the location might be
determined for the classroom.
The X shaped VESA plate is installed to the
monitor using the screws that come with
the monitor. The X plate is captured into
the bracket installed in the lid. Check to see
if the monitor will clear the opening and
reinstall to the optimum location on the lid
to permit best operation.
TOP OF MONITOR ON EDGE WITH LIP
