iLid® Table Instructions ©2018 CBT Supply, Inc.
3
Technical Support: 800-770-7042
Each iLid mounts with a spring-loaded hinge and a passive friction hinge.
Install iLid into
table top
There are two types of hinges
that are mounted in pairs.
Start by mounting the spring
loaded hinge to the lid on
the user’s left side.
The spring will keep the lid in the open position. Use three
Euro Screws to install.
On a padded work surface, place the table top face
down. Put the iLid with springloaded hinge in place.
The spring will need to be tensioned to get the bracket in
this position for installation. Once in place over the pilot
holes, install with Euroscrews.
Next, the passive friction hinge can be installed
with Euroscrews.
