Chapter 2: Installation
Connecting XTWALL Receiver
Connecting The Receiver
Connect CAT5 cable (coming from the transmitter) to the back of the receiver.
1.
Connect 1-2 display monitors to the VGA out connectors on the front of the receiver.
2.
Connect 1-2 sets of external speakers to the audio output connections on the front of the
3.
unit. (Standard 3.5mm stereo Miniplug)
XTWALL Receiver
Adjusting and Tuning the Signal
In order to fine tune the signal, adjust the individual dials one at a time starting with GREEN, then
BLUE, and lastly RED. As you turn the dials you will notice the colors slightly change as you increase
or decrease the strength. All dials should be around the same distance
