SmarAct PICOSCALE, Руководство пользователя

Страница: 29 / 80

5 PICOSCALE HARDWARE
Figure 5.1: Basic accessory , consisting of (1) PICO SCALE Controller, (2) sensor heads, (3) Environ-
mental Module, (4) One-Click cleaner and (5) User PC.
This chapter provides an introduction to the PICO SCALE Hardware. The basic accessories are
shown in fi gure 5.1. The main component is the PICO SCALE Controller. I t is available as a table-
top version (1) and a 19" rack version. Up to three measurement heads (2) and an environmental
module (3) can be connected to the controller. Typically each
PICO SCALE system is shipped with
some additional accessory (4) like a One-Click cleaner pen, head adapters, mirror mounts, etc.
Finally, a PC (5) is required.
I t is not part of the
PICO SCALE
system and must be provided by the
user.
5.1 PICO SCALE controller
The
PICO SCALE
Controller contains the laser source, various optics and detection electronics. I t
furthermore holds the position calculation unit, which is a hybrid system with a high performance
FPGA and an embedded PC. This combination guarantees maximum
fl exibility and highest perfor-
mance.
29 PicoScale User Manual