SMAR TT400WH, Руководство пользователя

Страница: 18 / 46

TT400 WirelessHART ® - Operation, Maintenance and Instruction Manual
1.4
The equipment comes from the factory with the Battery Module turned off, for safety reasons and
shipping regulations. To turn it on using the front switch, it is necessary to previously connect the
Battery Module connector to the radio board, located on the back of the equipment (Figure 1.4).
Figure 1.4 – Connecting the Battery Module to the Radio Board
The communication ports allow communication with the transmitter. To this end, should be connected to
a HART configurator in the "CN1" and "CN2" communication terminal, which is shown in Figure 1.5.
Local
Adjustment
ON/OFF
Terminals
Communication
Terminals
Figure 1.5 – Transmitter Terminals
The maintenance port allows for local configuration of the equipment. To access it, a HART configurator
must be connected to the communication terminals “CN1” and “CN2“, shown in Figures 1.5 and 1.6.