SMAR TT301, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 48 / 74

TT301 - Operation and Maintenance Instruction Manual
4.10
Z: Selects ESCAPE of the monitoring mode.
S: Enters the CONFIGURATION branch, starting with function UNIT.
Unit (UNIT)
Z: Moves to the DISPLAY-1 function.
S: Starts selection of engineering unit for process variable and setpoint indication.
After activating (S), you can move around the options available in the table below
by activating (Z).
DISPLAY DESCRIPTION
C
Degree Celsius
F
Degree Fahrenheit
R
Degree Rankine
K
Kelvin
mV millivolt
Ohm Ohm
SPEC Special Unit
NO
No Unit
ESC
-escape-
The desired unit is activated by using (S). Escape leaves unit unchanged.
NOTE
See sp
ecial sensor in Section 3 for more information on “special unit”.
Display 1 (LCD_1)
Z: Moves to the DISPLAY-2 function.
S: Starts selection of variable to be indicated as primary display.
After activating (S), you can move around the options available in the following
table by activating (Z).
DISPLAY DESCRIPTION
SP%
Setpoint (%)
PV%
Process Variable (%)
MV%
Output (%)
ER%
Error (%)

Nothing
TI SP generator time
CU
Output (mA)
PV
Process Variable (eng. unit)
SP
Setpoint (eng. unit)
ESC
-escape-
The desired variable is activated using (A). Escape leaves primary variable unchanged.