SMAR TP302, Руководство по эксплуатации и техническому обслуживанию владельца, Страница: 31 / 54

Configuration
3.11
Figure 3.10 – Step 3 – TP302
Figure 3.11 – Step 4 – TP302
Figure 3.12 – Step 5 – TP302
NOTE
local adjustment configuration is only a suggestion. The user may choose his preferred configuration
via Syscon, simply configuring the display block (Refer to paragraph Display Transducer Block).
Place the magnetic tool in
orifice Z. In case this is
the first configuration, the
option shown on the
display does the
configuration tool
configure that the tag with
its corresponding
mnemonic. Otherwise, the
option shown on the
display will be the one
configured in the prior
operation. By keeping the
tool inserted in this orifice,
the local adjustment menu
will rotate.
In this option the
first variable
(P_VAL) is showed
with its respective
value (if you to
want that it keeps
static, put the tool
in S orifice and
stay there.
In order to range the lower
value (lower); simply insert
the magnetic tool in orifice
S as soon as LOWER is
shown on display. An
arrow pointing upward (

)
increments the value and
an arrow pointing
downward (

) decrements
the value. In order to
increment the value, keep
the tool inserted in S up to
set the value desired.
In order to decrement
the lower value, place
the magnetic tool in
orifice Z to shift the
arrow to the downward
position and then, by
inserting and keeping
the tool in orifice S, it is
possible to decrement
the lower value.
In order to range the upper
value (lower); simply insert
the magnetic tool in orifice S
as soon as UPPER is shown
on display. An arrow pointing
upward (

) increments the
value and an arrow pointing
downward (

) decrements
the value. In order to
increment the value, keep the
tool inserted in S up to set
the value desired.
In order to decrement the
upper value, place the
magnetic tool in orifice Z
to shift the arrow to the
downward position and
then, by inserting and
keeping the tool in orifice
S, it is possible to
decrement the upper
value.