SMAR RHP303, Руководство пользователя, Страница: 7 / 16

RHP303 – User’s Manual
7
Baud Rate LEDs
The BD0 to BD9 LEDs blink in yellow to indicate the baud rate used by the Profibus DP Repeater
according to the next figure. The baud rate will be the same for every channel.
Figure 5 –BD0 to BD9 LEDs to indicate the communication rate
BDO BD1 BD2 BD3 BD4 BD5 BD6 BD7 BD8 BD9
9,6 Kbps ON
off off off off off off off off off
19,2 Kbps off ON off off off off off off off off
45,45 Kbps off off ON off off off off off off off
93,75 Kbps off off off ON off off off off off off
187,5 Kbps off off off off ON off off off off off
500 Kbps off off off off off ON off off off off
1,5 Mbps off off off off off off ON off off off
3,0 Mbps off off off off off off off ON off off
6,0 Mbps
off off off off off off off off ON off
12 Mbps
off off off off off off off off off ON
LEDS
Baudrate
Status LEDs (ST)
Each Profibus DP Repeater channel has a ST LED. The red ST LED indicates the channel status.
If the LED is off, the channel is good. If it is on, the channel has some fault. It can be caused by a
cable short circuit or any other problem that may degrade the signal until it is no longer recognized
by the RHP303.
Channel Status ST LED
Good Off
Faulty On