SMAR FY301, Инструкция по эксплуатации и техническому обслуживанию

Страница: 36 / 82

FY301 - Operation, Maintenance and Instructions Manual
4.2
Figure 4.2 - Jumpers W1 and W2
Local Programming Tree
The programming tree is a tree shaped structure with a menu of all available software functions, as
shown on figure 4.3.
While in local adjustment, it is possible to browse through all configuration options by keeping the
magnetic tool in orifice “Z”. Upon choosing the option as described, place the tool in orifice “S” in order
to actuate.
By keeping the tool in orifice “S” it is possible to continuously actuate the selected parameter, since this
is a numeric value. Actions by increment are performed by repeatedly placing and removing the
magnetic tool until reaching the desired valve.
S
Op
Z
Z Z Z Z Z Z Z
DISPLAY
AIR_T
TYPE CHAR MODE SETUP
TR SP% TR
S
Lin
EP50
HY50
Tab
S
Lind
Linr
Rotd
Rotr
Auto
Man
S
Z
Z Z Z Z
S ACTION
ROTATION Z
Z Z Z Z
Z
LOPOS LOPOS SP% KP KP TIME TIME UPPOS
UPPOS
Figure 4.3 - Local Programming Tree
NOTE
The user shall perform every parameter actuation judiciously, since actuation writes configuration parameters
on a permanent basis and does not require confirmation. Once an actuation is performed it is assumed to be
the desired configuration.