Smalvic FI-64ET, Инструкции по установке, использованию и обслуживанию

Страница: 45 / 106

EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
43
ELECTRONIC R PROGRAMMER INSTRUCTIONS (MODELS FI-64/74 MTR-WTR)
This timer displays the time and operation of the oven.
By operating on the push knob it is possible: to adjust the
time, program the start and end time of cooking, set the
alarm.
Adjusting the time
To adjust the time, briefly press the knob 4 times until the
“CLOCK” icon flashes.
Therefore, increase or decrease the time in steps of 1 minute,
turn the knob clockwise or anti-clockwise and the minutes hand
moves by 1 minute clockwise or anti-clockwise.
After 10 seconds from the last adjustment, the electronic timer
automatically exits the time adjustment mode.
Manual cooking
At rest, the timer allows manual cooking by operating on the
oven master switch (outside the device).
After having supplied the mains power supply to the timer, wait
approx. 2 seconds before the relay is energised.
Programming the cooking start and end time
Programming the cooking start time : press the knob once briefly
until the “START TIME” icon flashes. Turn the knob clockwise
until the desired cooking start time is displayed.
The “START TIME” icon continues to flash for 10 seconds from
the last rotation. If the knob is not turned or pressed within this
time, the hands go back to displaying the time and the program
is annulled. If the knob is pressed, the Cooking Start time is
memorised ( “START TIME” icon on with fixed light), as long as
at least 1 minute of delay has been set and you pass to setting
the Cooking End time (the “END TIME” icon goes from off to
flashing). Cooking will start when “Cooking Start Time Set =
Current Time”.
Programming the cooking end time allows immediate start-up
and to end cooking in an automatic manner on the basis of the
programmed time.
Programming the cooking end time : press the knob twice briefly
until the “ “END TIME” TIME” icon flashes.
To increase or decrease the cooking time, turn the knob
clockwise or anti-clockwise and the minutes hand moves by 1
minute clockwise or anti-clockwise.
Flashing of the “END TIME” icon continues for 10 seconds from
the last rotation. The program can be confirmed by pressing
the knob as long as at least 2 minutes of cooking have been
programmed.
On confirming the program, cooking is started and the acoustic
alarm is automatically activated. Cooking will end when “Cooking
End Time Set = Current Time”.
To display the program set, press and release the knob briefly
and, at the same time, the clock hands and icons display the
program set. At the end of cooking, the “END TIME” icon flashes
and the alarm emits acoustic signals.
To annul the program before the end, press the knob for 3
seconds; the program will be annulled and the timer goes back
to manual cooking mode.
Minute minder programming
Programming the Minute Minder allows an alarm at the end of
a programmed time without activating cooking. To program an
“alarm” without starting cooking, press the knob briefly 3 times
until the “ALARM” icon flashes. Turn the knob and the setting of
the Minute Minder is identical to that of the Cooking End time.
The Minute Minder can only be used when there is no program
in progress.
Signalling and blackout
The timer signals every power cut by the flashing “CLOCK”
symbol. In this case, press the knob briefly to disable the signal.