SMAI XF-WM-CUB, Руководство пользователя

Страница: 3 / 8

3
1
Remove all components from packaging. Check the parts list from the previous page to ensure all components are
accounted for.
2
The assembly requires at least 2.0m of space width-wise on a wall. Ensure you have a suitable location.
3
Take 1 of the MAIN FRAME (#1) components and test fit against the wall. You will need to determine the appropriate
height for the bracket. This will depend on your intended use or on the installation height of any bags you intend to
hang from the frame.
4
Once the adequate height has been determined, mark the location of the lowest bolt hole.
5
Remove the main frame from the wall. Use a ruler to mark the drill locations for the additional holes. These are spaced
225mm vertically as per the attached mounting diagram below. Use a spirit level, laser level or plumb bob if available
to ensure the mounting points are precisely vertical.
14mm
225mm
225mm
1140mm