Chapter 2:
Description
18
Digital-to-analog converter interface (DAC)
The LCC-10 provides two options for the digital to analog converter interface:
•
One 10 bits DAC, with an output range from 0 to 5V.
•
One 16 bits DAC, with an output range from 0 to 10V.
The analog output is located in the J3 (INPUT/OUTPUT) connector, pin number 6. See
Table 13 for more details.
Please note that these two are not available at the same time. LCC10 has 10 bit as
default but is also available as 16 bit option with a hardware change.
The table below shows the LCC-10 motion controller pin related to digital to analog
conversion interface and its voltage range for both DAC options.
Pin
V
min
V
typ
V
max
Units
ANALOG OUT
10 bits
-
0…5
-
V
ANALOG OUT
16 bits
-
0…10
-
V
Table 19: Voltage level at Analog out pin