On-Site Inverter Installation
SMA
Technologie AG
Page 22
SC-100-13:SE2407
Installation manual
6 On-Site Inverter Installation
6.1 Mounting on the Foundation
Removing the Transport Locks
The inverter must be fixed to the foundation or foundation slab. Therefore, the respective
attachment points (wall anchors, threaded bolts) must be in place before installation. A
rig close to the base of the device facilitates its attachment to the foundation. The
corresponding figure is found in
Appendix D
.
After attaching the device to the foundation, remove the transformer transport lock. This
consists of an iron right-angle that is fastened to the side of the cabinet.
Figure 6.1:
View of transformer transport lock with sidewall removed
Attaching the inverter to the foundation or the foundation plate.
Angle bracket
