manualshive.com logo in svg

SMA SUNNY BOY STORAGE 3.7, Руководство по эксплуатации


Поделиться
Скачать
background image

2  Safety

SMA Solar Technology AG

Operating manual

SBSxx-10-BE-en-11

9

2

Safety

2.1

Intended Use

The Sunny Boy Storage is an AC-coupled battery inverter for parallel grid and stand-alone mode
operation. The Sunny Boy Storage converts the direct current supplied by a battery into grid-
compliant alternating current. The Sunny Boy Storage, together with a battery and a compatible
energy meter, make up a system for increased self-consumption (Flexible Storage System) or,
together with a automatic transfer switch compatible with Sunny Boy Storage, a battery-backup
system (Flexible Storage System with battery-backup function).
The product must only be used as stationary equipment.
The product is suitable for indoor and outdoor use.
The product must only be operated in connection with an intrinsically safe lithium-ion battery
approved by SMA Solar Technology AG. An updated list of batteries approved by SMA Solar
Technology AG is available at www.SMA-Solar.com.
The battery must comply with the locally applicable standards and directives and must be
intrinsically safe (see technical information "SMA Flexible Storage System - Detailed explanations of
the safety concept" for detailed explanations regarding the safety concept of battery inverters by
SMA Solar Technology AG).
The communication interface of the battery used must be compatible with the product. The entire
battery voltage range must be completely within the permissible input voltage range of the product.
The maximum permissible DC input voltage of the product must not be exceeded.
The product is not suitable for supplying life-sustaining medical devices. A power outage must not
lead to personal injury.
All components must remain within their permitted operating ranges and their installation
requirements at all times.
The product must only be used in countries for which it is approved or released by SMA Solar
Technology AG and the grid operator.
The product may only be operated with one of the energy meters approved by SMA Solar
Technology AG. The following energy meters are allowed to be used when operating this product:

• EMETER-20 (SMA Energy Meter)
• HM-20 (Sunny Home Manager 2.0)

The product may only be operated in battery-backup systems using an automatic transfer switching
device approved by SMA Solar Technology AG. You are not allowed to build automatic transfer
switching devices for operation with this product by yourself on the basis of a circuit diagram.
The following automatic transfer switching devices are allowed to be used when operating this
product:

• 10012856_V1.4 (3PH automatic transfer switching device for SMA Sunny Boy Storage) from

enwitec electronic GmbH & Co.KG

• For Italy only: 10013490_V1.0 (1PH Battery Backup-Distribution for 1 x Sunny Boy Storage)

from enwitec electronic GmbH & Co.KG

• For Italy only: 10013491_V1.0 (3PH automatic transfer switching device for SMA

Sunny Boy Storage) from enwitec electronic GmbH & Co.KG

Содержание SUNNY BOY STORAGE 3.7















































































































































Отзывы:

Нет отзывов

Похожие инструкции для SUNNY BOY STORAGE 3.7

La Marche FT Series Installation And Operation Manual preview
FT Series
Бренд: La Marche Страницы: 18
Generac Power Systems 00919-0 Owner'S Manual preview
00919-0
Бренд: Generac Power Systems Страницы: 32
Helvest DCC-E Quick Start preview
DCC-E
Бренд: Helvest Страницы: 2
meibes Solar station S Technical Information For Installation And Operation preview
Solar station S
Бренд: meibes Страницы: 21
PanelClaw Polar Bear III Installation Manual preview
Polar Bear III
Бренд: PanelClaw Страницы: 19
World Friendship WF-600T Series User Manual preview
WF-600T Series
Бренд: World Friendship Страницы: 17
PAC L.O.C.PRO LP7-4 Installation Instructions preview
L.O.C.PRO LP7-4
Бренд: PAC Страницы: 2
Shenzhen Huangjintai Electronic NK-GP600 User Manual preview
NK-GP600
Бренд: Shenzhen Huangjintai Electronic Страницы: 9
Hagstrom KE-USB108 User Manual preview
KE-USB108
Бренд: Hagstrom Страницы: 36
Morningstar SureSine 1000 W Installation And Operation Manual preview
SureSine 1000 W
Бренд: Morningstar Страницы: 66
FOR-A VTW-350HS Operation Manual preview
VTW-350HS
Бренд: FOR-A Страницы: 28
Inovance MD300A-S0.2BA Owner'S Manual preview
MD300A-S0.2BA
Бренд: Inovance Страницы: 67
Shindaiwa DGK150D Owner'S And Operator'S Manual preview
DGK150D
Бренд: Shindaiwa Страницы: 58
Kaco blueplanet XP10U-H4 PSD Instruction Manual preview
blueplanet XP10U-H4 PSD
Бренд: Kaco Страницы: 53
PhD Solutions SP-1x2-HD3D Operation Manual preview
SP-1x2-HD3D
Бренд: PhD Solutions Страницы: 12
Growatt SPH3000TL BL-US Installation & Operation Manual preview
SPH3000TL BL-US
Бренд: Growatt Страницы: 35
ECdesigns PowerDAC-SX User Manual preview
PowerDAC-SX
Бренд: ECdesigns Страницы: 19
YASKAWA Varispeed CIMR-V7AZ Series Quick Start Manual preview
Varispeed CIMR-V7AZ Series
Бренд: YASKAWA Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды