5 Mounting
SMA Solar Technology AG
Operating manual
31
SI44M-80H-13-BE-en-15
5. If the Sunny Island is to be secured against theft, mark the drill holes for the anti-theft device. Use at least one hole
on the right and one on the left.
6. Mount the SI4.4M-13 to the wall mounting bracket. For this, use
the side recess grips. Keep the Sunny Island in a horizontal
position when moving it.
7. Mount the SI6.0H-13 and SI8.0H-13 to the wall mounting
bracket. For this, use the side recess grips or a steel rod (diameter:
maximum 30 mm). Keep the Sunny Island in a horizontal position
when moving it.
8. Use an Allen key (AF 5) to attach the Sunny Island to the wall
mounting bracket on both sides with the M6x10 screws provided
(torque: 4 Nm to 5.7 Nm). This will prevent the Sunny Island from
being lifted off the bracket.
9. Close the recessed grips with the ventilation grids. Place the
ventilation grid marked links/left on the left recessed grip and the
ventilation grid marked rechts/right on the right recessed grip.
10. In order to protect the Sunny Island against theft, attach the
bottom side to the wall with two security screws.
11. Ensure that the Sunny Island is firmly attached.
