7 Commissioning
SMA America, LLC
52
SB3-5TLUS22-IA-en-10
Installation Manual
7 Commissioning
7.1 Making Settings via the Rotary Switches
7.1.1 Overview of the Rotary Switches
The inverter can be configured for different countries and for use in backup and off-grid systems via
2 rotary switches. The rotary switches can also be used to change the display language.
By default, the inverter is set to a specific country data set. You can see which country data set was
set by default at the factory in the supplementary sheet provided with the factory settings. If the default
country data set of the inverter does not apply to your country, then you must change the country data
set and the display language. You can also change the display language independently of the
country data set (see Section 7.1.3).
If you use a communication product, you can also change the country data set after commissioning
with that communication product (see Section 7.3).
Figure 15: Configuration area inside the inverter
Item
Designation
A
Rotary switch A for setting the country standard
B
Rotary switch B for setting the language
C
Rotary switch C for setting the Zigbee
®
ID
D
Jumper slot for setting the language to English
