SMA 10000TL, Руководство по установке

Страница: 19 / 96

Installation Manual SMC9-11TLRP-IA-en-51 19
SMA Solar Technology AG 4 Product Description
The display and the LEDs of the inverter are located on the enclosure lid and indicate the operating
state of the inverter.
The display shows the current operating data of the inverter (e.g. mode, performance, input voltage)
and errors or faults (see section 10.2 "Display Messages", page 58).
The LEDs indicate the operating state of the inverter, and clarify the messages in the display using
different blink codes (see section 10.1 "LED Signals", page 56).
Korean mark of conformity The inverter complies with the
requirements of the applicable Korean
guidelines.
Chinese mark of conformity The inverter complies with the
requirements of the applicable Chinese
guidelines.
4.3 Display and LEDs
Figure 5: Design of the display
Position Designation Explanation
A Display 2-line LC text display for displaying operating data
B Tap symbol You can operate the display by tapping it:
• Tapping once: Switch on display illumination or switch to
the next display message.
• Tapping twice in quick succession: The inverter shows the
display messages from the start-up phase.
After two minutes, the backlight switches off automatically.
C Green LED Indicates the operating state of the inverter.
D Red LED Indicates an earth fault, a defective varistor or a defective string
fuse.
E Yellow LED Indicates an error or fault. Read the manual to rectify the error
or fault.
Icon Designation Explanation