www.smproaudio.com
11
3.3 Power connection
Power to the M-Patch 2 is required only if
you wish to use the headphone amplifier, or
view the illuminated led indicator lamps.
The included power supply can be connected
from mains power to the power connector
socket located on the rear panel of the M-
Patch 2.
The Blue led on the front panel (next to the
mono/stereo control switch) will illuminate when the
external power supply is connected and mains power
is present.
* NOTE: All passive attenuation functions operate fully
without the connection of the power supply. This
enables full portable use of the M-Patch 2 without
restriction.
4. FRONT PANEL CONTROLS
4.1 Stereo/Aux input selection control
The input selection controls on
the front panel of the M-Patch 2
allow selection of either ‘Stereo’
or ‘Aux’ input source material to
be routed to the output pairs for
immediate listening and
attenuation control.
Select the “stereo” position to activate the main stereo input
source connected to the XLR/combo inputs, or select “Aux”
